Primary chamber – Consists of a monolithic high grade refractory concrete with high grade insulation backing, . Utilising a refractory hearth or equivalent for continuous ash removal.

Secondary Chamber – Consists of high density, low thermal mass refractory ceramic fibre with an innovative low emissivity protective coating. bio medical waste treatment plant ( Incineration )with panel.

SOLID WASTE INCINERATOR   Feeding Capacity:   200 to 220 Kg.
Burn Rate *   60 Kg / hr
Ingredients to be burned   Cotton, Rubber, PVC Sheets, PE Gloves, Oil, Plastic Bottles, Paper etc.
Chambers *   Dual Chamber.
1: Primary Controlled Air
2: Secondary Excess Air
Temperature Monitoring   Required
Temperature Control to Primary & Secondary Chambers   Required
System Status & Alarms   Required for all necessary parameters.
Fittings & Accessories   Complete Package is required ( Including Nozzles & Flanges etc.)
Installation Requirements.   As low as possible . Almost Plug & Play type.
Dimensional Sketch, Operation & Installation Manuals.   Required
Off – Gas System   Required
Heat Insulation   Required for indoor installation
Delivery   Karachi Sea Port – Pakistan

The details of Components of incinerator is as follows:
Component Name        Features                 Range.
Primary Chamber   Temperature Required*   800 – 1000 deg C.
Heating Source   Natural Gas

Secondary Chamber   Temperature *   1100 – 1300 deg. C
Heating Source   Natural Gas + Propane or Fuel Oil as an additional source
Off – Gas Residence Time   2 Seconds.
Refractory Material   Material *   Alumina ( 56 – 80 % Pure )
Lining *   SS 316L
Life Span *   10 – 15 years.
Rating Temperature   1600 – 1800 deg. C
Media   Slightly acidic
Insulation   Material   Ceramic Fiber
Thickness   25 “ minimum
Feeding & Ash Removing     System   Air Tight ventilating locked doors ( Feeding from Top will be preferred)
Spares   Required for 5 Years trouble free operation