SPECIFICATIONS TECHNIQUES.
Capacité destructive de 55 Kg/h jour de déchets hospitaliers avec un p .c. i jusqu’à 3.200 Kcal/Kg
1)Type de déchet hospitalier
2)Pouvoir calorifique inférieur 3.200 kcal/kg
3)Humidité 20%
4)Teneur en cendres et/ou inertes 8%
5)Capacité destructive nominale 55 kg/h
6)Volume chambre de combustion 1,65 m³
7)Volume chambre postcombustion 2.1 m³
8)Temps transit des fumées en post combustion /sec. <2
9)Température minimale en postcombustion 1.100° C
10)Teneur d’oxygène libre en postcombustion 6%
11)Attribution refuse confectionné en sachets HDPE
12)Dispositif de chargement : hydraulique ; capacité de charge 0.5 m³
13)Combustible prévu Gasoil
14)Brûleur en chambre de combustion nbr : 1
15)Brûleur en chambre de postcombustion nbr : 2
• The site is surrounded by an iron fence (sheet metal) 3 meters height from the surface of the earth in order to protect the incinerators from dust storms
• The iron fence must have a 5 meters Width gate
• Automatic anti-rust and heat electrical circuit must be provided
• The furnaces are highly efficient, emissions-free, safe, and environmentally friendly and have capacity of not less than 3,000 kg of materials and the rate of burning at least 400 kg / h
• The method of feeding the furnace through a side slot or from the top and the emission of the smoke is completely prevented.
• a furnace Must have two rooms, one of them is the main room of not less than the “5” stoves to the process of burning materials and other secondary room of not less “2” stoves to burn resulting gas from the first process as well as the chimney
• The main component of the body of the furnace is stainless steel box, the thickness of not less than 7 mm with a layer of zinc phosphate plated with aluminium reflector to heat
CONSTITTUTION DE L’APPAREIL.