Analysis of the structure of automatic roller shutter filter

The automatic rolling curtain filter is a new type of air filtration equipment specially for air purification. After long-term research and development, it has made a major breakthrough in automatic function on the basis of traditional filters. It uses the pressure difference conversion before and after the filter as the basis for the sensor to receive the signal, and automatically replaces the filter material, which is the best choice for dust removal. So what is it made of that gives it such a powerful function? Let me do an in-depth analysis of its structure, so that users have a more intuitive understanding.

1. New filter box

The new filter box is to store clean rolling filter media. There is a limit plate on the new filter box. When the filter material is used up, an alarm will sound and the friction of the filter material roll will be increased to prevent the filter material from automatically sliding down.

Second, the old filter box

The lower box is the place where the filter material is crimped. Inside it is provided with a feeding wheel shaft, a rotating shaft, a sprocket, a coupling and a pressing plate for tightening the filter material.

Three, the baffle plate

When the automatic roller blind filter is working, the filter material and the air intake direction must be on a vertical plane. Because the steel plate has good rigidity, it is not easy to bend and deform. Therefore, slats must be used for support. At this time, the barrier fence plays a supporting role.

Fourth, the pressure plate

When the work stops, the return air can easily blow back the filter material to make it shift. Therefore, it is necessary to adjust the positioning bolts on the pressing plate according to the thickness of the filter material. And it can also increase the friction of the filter material to avoid the filter material chute.

Five, transmission mechanism

The main components of the transmission mechanism are the motor and the reducer. The main difference lies in the difference in the filter period due to the amount of dust. The transmission process can be operated manually and automatically. The control circuit consists of a switch, a contactor, a time relay, and a pneumatic micro-pressure sensor, etc. It can use a power supply of 380V or 220V, 50Hz. When the filter resistance value exceeds the set value, the motor stops and the refueling process ends. When the filter material is exhausted, the switch on the top of the material reel will be opened immediately, the motor will stop running, and at the same time, it will form a closed loop with the buzzer and alarm indicator to send out an alarm. After the filter material is sufficient, the automatic control system returns to its normal state.

How about it, do you have a general understanding of the automatic rolling filter? I believe it will play a very important role in our procurement selection.