Items/Model
TS500( PLC)
Photo
Concept
Waste Incineration Treatment
Burn Rate
150-200 kg/hour
Control Mode
PLC( Programmable Logic Controller Incinerator)
Combustion Chamber
2700L
Internal Measurements
190x120x120cm
Second Chamber
1300L
Smoke Filter Chamber
Yes
Feed Setting
Handbook
Voltage
220V
Oil Consumption (kg/hour)
Typical 28
Gas Consumption (m3/hour)
***
Temperature Display
Digital Show
Temperature Defense
Yes
Oil Tank
1400L
Feed Door
90x80cm
Chimney
10Meter
Smokeshaft Type
Stainless Steel
1st.
Gross Weight
15000kg
Outside Measurements
400x210x300cm( without chimney)
2020-03-21
The air supply should be controlled efficiently;Flame contact with all the gases should be achieved;The minimum combustion temperature of the primary chamber should not be less than 850°C;The primary combustion chamber should be equipped with a means to provide supplemental liquid fuel supply.The primary chamber should be cold face refractory lining, with a minimum thickness 100 mm.The following conditions should be met in the secondary combustion chamber:The air supply should be controlled efficiently;Flame contact with all the gases should be achieved;The size of the secondary chamber should be properly designed to ensure that the gas retention time should not be less than 2 seconds;The secondary chamber should be cold face refractory lining, with a minimum thickness 100 mm;The chamber should incorporate an integrated combustion burner air fans with automatically controlled distribution;The gas temperature, as measured against the inside wall in the secondary chamber (not in the flame zone) should not be less than 1,100°C;HICLOVER – Medical EnvironmentalWaste IncineratorsMedical Waste IncineratorPet Animal CremationSolid Waste Incinerator
Tel: +86-25-8461 0201Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]Nanjing Clover Medical Technology Co.,Ltd.2020-03-21
